CET 25hp Kubota Diesel Mid-Range Firefighting Pump - PFP-25HP-DSL-MR - 310 GPM / 175 PSI - 1x1.5" Outlet - NH/NST / 1x2.5" Inlet - NH/NST- Available in Skid Version

The MR version gives you more pressure to meet the requirements of an initial attack.

PORTABLE PUMP AVAILABLE OPTIONS

• Control Panel - Add $385
• Hand Primer - Add $305
• Bronze Casing (for single stage pump) - Add $1400
• Bronze Casing (for dual stage pump) - Add $2,400
• Scotty Foam - Add $1200
• Set of Wheels - Add - $625
• Vinyl Pump Cover - Add - $550
• LED Lights - Add - $125
• Boat Frame - Add $500

EMAIL SALES@Firefightingsupply.com for formal invoice and quote with options.

SKID PUMP AVAILABLE OPTIONS

• 3 Gallon Fuel Tank - Add $450
• 6 Gallon Fuel Tank - Add $450

EMAIL SALES@Firefightingsupply.com for formal invoice and quote with options.

SKID PUMP SUCTION AVAILABLE OPTIONS

• Standard suction with 2-1/2” industrial ball valve – Add $1350
• Standard suction with two (2) - 2-1/2” industrial ball valve – Add $1425
• Standard suction with 2-1/2” fire grade ball valve – Add $2000
• Stainless Steel Suction Piping – Add $312

EMAIL SALES@Firefightingsupply.com for formal invoice and quote with options.

SKID PUMP MANIFOLD AVAILABLE OPTIONS

• Manifold comes with four (4) capped outlet on work line 2 -1” and 2 1-1/2” - Add $787
• Tank Fill 1” - Add $227
• Tank Fill 1-1/2” - Add $374
• ¾” Garden hose discharge with industrial ball valve - Add - $127
• 1” fire grade ball valve service line with cap and chain- Add - $500
• 1-1/2” fire grade ball valve service line with cap and chain - Add - $514
• 2-1/2” fire grade ball valve service line with cap and chain – Add - $650
• 1” Industrial ball valve service line with cap and chain – Add $210
• 1-1/2” Industrial ball valve service line with cap and chain – Add $250
• 2-1/2” Industrial ball valve service line with cap and chain – Add $350
• Stainless steel manifold Add $312

EMAIL SALES@Firefightingsupply.com for formal invoice and quote with options.

PUMP UNIT SPECIFICATIONS

• C.E.T. single stage centrifugal pump
• Pump body made from high resistance aluminum alloy
• Bronze impellers
• Mechanical shaft seal
• Stainless steel pump shaft
• Electric priming system, guaranteed up to 20’ (6 meter) lift
• One 1 1⁄2" (38mm) delivery outlet with Fire Type swing-out valve
• One 2 1⁄2" (65mm) suction inlet
• Dimensions: Length: 31'' (787 mm);
• Width: 26'' (660 mm);
• Height: 31-1/2'' (800 mm).
• Wet weight: 360 lbs (163 kg)
• Port type NH/NST
• Valve Type - Ball
• Seal type - Mechanical (seal material stainless steel)
• Suction Lift - Up top 20'
• Pump stages - 1

ENGINE SPECIFICATIONS

• D902 Kubota liquid cooled engine
• 3-cylinder, 4-stroke diesel engine
• Electric start
• 6 gallon (22 l) detachable fuel tank
• Alternator 12V - 40A
• Engine RPM - 3600
• Horsepower - 25HP
• No low oil shutdown alert
• Battery not included

CONTROL PANEL

• Engine start/stop button
• Throttle control lever
• Operating panel light
• Pilot lights
• Pressure gauge
• Vacuum pressure gauge

PERFORMANCE