CET Diesel High Pressure/High Volume pump - PFP-56HP-DSL - One 4” (100 mm) suction inlet / Two 2 1/2” (65 mm) delivery outlets -

This high pressure/high volume pump is made to fight fire or supply water to the fire scene. Engine and pump are mounted on a skid chassis

SKID PUMP AVAILABLE OPTIONS

• 3 Gallon Fuel Tank - Add $450
• 6 Gallon Fuel Tank - Add $450

EMAIL SALES@Firefightingsupply.com for formal invoice and quote with options.

SKID PUMP SUCTION AVAILABLE OPTIONS

• Standard suction with 2-1/2” industrial ball valve – Add $1350
• Standard suction with two (2) - 2-1/2” industrial ball valve – Add $1425
• Standard suction with 2-1/2” fire grade ball valve – Add $2000
• Stainless Steel Suction Piping – Add $312

EMAIL SALES@Firefightingsupply.com for formal invoice and quote with options.

SKID PUMP MANIFOLD AVAILABLE OPTIONS

• Manifold comes with four (4) capped outlet on work line 2 -1” and 2 1-1/2” - Add $787
• Tank Fill 1” - Add $227
• Tank Fill 1-1/2” - Add $374
• ¾” Garden hose discharge with industrial ball valve - Add - $127
• 1” fire grade ball valve service line with cap and chain- Add - $500
• 1-1/2” fire grade ball valve service line with cap and chain - Add - $514
• 2-1/2” fire grade ball valve service line with cap and chain – Add - $650
• 1” Industrial ball valve service line with cap and chain – Add $210
• 1-1/2” Industrial ball valve service line with cap and chain – Add $250
• 2-1/2” Industrial ball valve service line with cap and chain – Add $350
• Stainless steel manifold Add $312

EMAIL SALES@Firefightingsupply.com for formal invoice and quote with options.

ENGINE SPECIFICATIONS

• Hatz developing 56hp at 2600 RPM, water cooled with internal system, 4-cylinder, diesel engine.
• 12V electric start.
• 6 gallons capacity fuel tank, sufficient for 2 hours continuous operation approximately, made of plastic, with filling neck and lid.

PUMP UNIT SPECIFICATIONS

• Single stage centrifugal pump.
• Pump body made from resistant aluminum alloy.
• Bronze impellers.
• Mechanical shaft seal.
• Stainless steel pump shaft.
• Electric priming system, guaranteed up to 20’ (6 meter) lift.
• Two 2 1/2” (65 mm) delivery outlets.
• One 4” (100 mm) suction inlet.
• Dimensions: Length: 55'' (1397 mm); Width: 39-13/16'' (991 mm); Height: 43-9/16'' (1106 mm).
• Weight: 950 lbs (431 kg)

CONTROL PANEL

• Engine key switch
• Throttle control knob
• Push priming button
• Pressure gauge
• Vacuum gauge

PERFORMANCE