Waterous E500 Series Portable Fire Pump, High Pressure / High Volume
Waterous E501C / E511C Portable Fire Pumps
E501-C
| |
|
GPM |
|
L/min |
|
L/sec |
|
PSI |
|
Bar |
|
kPa |
|
MPa |
Max Flow:
|
|
110 |
|
420 |
|
6.6 |
|
100 |
|
7 |
|
700 |
|
0.7 |
Max Pressure:
|
|
50 |
|
200 |
|
3.3 |
|
400 |
|
28 |
|
2800 |
|
2.8 |
E511-C
| |
|
GPM |
|
L/min |
|
L/sec |
|
PSI |
|
Bar |
|
kPa |
|
MPa |
Max Flow:
|
|
275 |
|
1000 |
|
16.5 |
|
50 |
|
3.5 |
|
350 |
|
0.35 |
Max Pressure:
|
|
100 |
|
400 |
|
6.5 |
|
190 |
|
13 |
|
1300 |
|
1.3 |
The Waterous E500 Series Motor Pump is specifically designed for mounting on specialized attack vehicles.
The diesel-powered motor pump combines the muscle of Waterous vehicle-mounted pumps with the convenience of its own power source.
Available in 2 models:
| |
|
Flows: |
| E501-C High Pressure Model: |
|
110 GPM @ 100 PSI (420 l/min @ 7 bar)
50 GPM @ 400 PSI (190 l/min @ 28 bar) |
| |
|
Flows: |
| E511-C High Volume Model: |
|
275 GPM @ 50 PSI (1140 l/min @ 3.5 bar)
100 GPM @ 190 PSI (380 l/min @ 13 bar) |
Pump Specifications:
Intake:
| E501-C: |
|
2" female NPT |
| E511-C: |
|
3" female NPT (Optional 3" Victaulic Adapter) |
Discharge:
| E501-C: |
|
1-1/2" female NPT |
| E511-C: |
|
2" female NPT (Optional 2" Victaulic Adapter) |
Volute Body and Head:
High-strength aluminum alloy protected by a proprietary dual anodizing and sealing process for superior corrosion protection and resistance to acids and alkaline solutions.
Impeller:
High-strength, corrosion-resistant bronze, fully enclosed, double-hubbed to balance hydraulic thrust, mechanically balanced to eliminate vibration.
Impeller Shaft:
Integral driven gear and shaft made of hardened steel, nickel-plated for wear and corrosion resistance.
Wear Rings:
Long wearing bronze. Easy to replace when required to restore original pump efficiency.
Drive Shaft and Gear:
High-strength stainless steel shaft and a heat-treated ductile iron gear.
Shaft Seal:
Spring-loaded mechanical type. Wear and heat resistant silicon-carbide.
Gear Case:
Two-gear speed increaser utilizing high-strength aluminum alloy case. Helical cut gears for reduced wear and noise and anti-friction bearings throughout.
Engine Specifications:
Engine:
Kubota, Model D902-E3B, Super Mini Series, in-line 3-cylinder, water-cooled, naturally aspirated delivering a maximum output of 24.8 hp (18.5 kw) @ 3600 RPM, 54.8 cu. in. (898 cc) displacement, 4-cycle, diesel fueled.
Lubrication:
Pressure fed with spin on filter.
Starter:
12-14 volt, 1.2 kW
Emission Regulation:
Tier 4
Alternator:
12 VDC, 40 AMP
Options & Accessories:
Priming System:
The priming system consists of either a Waterous hand or electric primer shipped loose for remote mounting.
Exhaust System:
Spark Arrestor
Control Panel:
Allows the operator to change operating parameters electronically with a touch of a button
Dimensions & Weights:
| |
|
Length (in/cm) |
|
Width (in/cm) |
|
Height* (in/cm) |
|
Weight (lb/kg) |
| E501-C: |
|
34.39 (87.4) |
|
20.8 (52.8) |
|
25 (63.5) |
|
252 (115) |
| E511-C: |
|
35.28 (89.6) |
|
20.8 (52.8) |
|
25 (63.5) |
|
237 (108) |
