Waterous PB18-3030C Portable Firefighting Pump, High Volume / Low Pressure

Waterous PB18-3030C Portable Fire Pump, High Volume / Low Pressure
Waterous PB18-3030
Your First Choice for Water Transfer/Hand-Line Operations

The Waterous PB18-3030C Portable Fire Pump is an extraordinary transfer and supply pump with exceptional flow capacity and good pressure for hand-line operations. 
Equipped with a V-twin Briggs and Stratton® 18 HP (13.4 kW) engine. The PB18-3030 also comes with a two-year limited warranty and is CE marked.

PUMP SPECIFICATIONS:

• Type: Transfer - Supply
• Intake: 3" inch female NPT
• Discharge: 3" (inch) female NPT with check valve (3030C)
• Console: Operator's panel includes discharge pressure gauge, compound intake pressure gauge, low oil pressure warning light, start and stop control, speed control, panel light and 12 volt outlet
• Impeller: High-strength, corrosion-resistant bronze, fully-enclosed, double-hubbed to balance hydraulic thrust, mechanically balanced to eliminate vibration
• Wear Rings: Long wearing bronze. Easy to replace when required to restore original pump efficiency
• Shaft Sleeve: High-strength stainless steel
• Shaft Seal: Spring-loaded mechanical type
• Priming: Combination spark arresting muffler and exhaust primer, fast and easy to use - Quarter turn bronze priming valve, operates with push/pull knob
• Warranty: Waterous Two-Year Limited Warranty
• Max Flow - 400GPM & 15PSI (1.0 bar)
• Max Pressure - 100 GPM & 110 PSI (7.6 bar)

ENGINE SPECIFICATIONS:

• Engine: Briggs & Stratton, model 356447, Vanguard V-Twin air cooled, overhead valve (OHV) design delivers a maximum output of 18 HP (13.4 kW) @ 3600 RPM. 34.75 cu. in. (570 cc) displacement, 4-cycle, gasoline fueled, horizontal shaft.
• Lubrication: Full pressure lubrication system with an automotive style oil filter. Oil fill tube with dipstick.
• Starter: 12-volt electric and manual recoil.
• Alternator: 16 A

BASES:

Rail:

• Rigid steel channels
• Control panel and fuel tank shipped loose

No Base:

• Control panel and fuel tank shipped loose

FUEL TANK:

Rail or No Base Models:

• All PB18 models (except PB18-LE) with Rail or No Base will have a shipped-loose, 3-gallon (11 liter) fuel tank that meets the EPA evaporative requirement (40 CFR Part 1060).

Approximate Dimensions and Weights

With Rail Base

• Length - 19-3/4" (50.2 cm)
• Width - 20" (50.8 cm)
• Height - 21" (53.3 cm)
• Dry Weight - 113 lbs (51.3 kg)
• Ship Weight - 141 lbs (64.0 kg)

Without Rail Base

• Length - 19-1/2" (49.5 cm)
• Width - 20" (50.8 cm)
• Height - 20" (50.8 cm)
• Dry Weight - 108 lbs (49.0 kg)
• Ship Weight - 136 lbs (61.7 kg) 

Discharge - 3" female NPT with check valve

Intake - 3" inch female NPT

Primer - Exhaust Primer